用途及特點
該機床用于活塞環精車外圓成品后打磨,特別適用打磨桶面環、錐面環相鄰邊緣倒角處毛刺,對減少漏光有明顯作用。該機床******的特點是采用柔性裝置使活塞環表面受到壓力均衡。解決了國內現有加工設備因裝夾后整筒環中心偏差,影響表面加工質量的關鍵問題。機床采用進口三菱可編程序控制器控制,結構簡單,操作方便。
USES and features
Type DX06 finished ring polishing machine. The machine is used for piston ring car after finished the cylindrical grinding, especially for grinding barrels, cone surface adjacent edge chamfer burrs, has obvious effect to reduce light-leaking. The most obvious feature of the machine tool is a flexible device surface of piston rings pressure equalization. Solve the domestic existing the whole barrel after processing equipment for the clamping ring center deviation, the key factor affecting the quality of surface processing problem. Machine adopts imported mitsubishi PLC control, simple structure, easy to operate.
加工活塞環直徑范圍Machining piston ring diameter range |
Φ 39mm- Φ 140mm (A 型)Φ 100mm- Φ 280mm (B 型) Φ 39 mm - 140 mm (A type ) Φ Φ 100 mm - 280 mm Φ (B type ) |
加工工件長度范圍 Machining length range |
﹤300mm |
打磨輪尺寸范圍 Grinding wheel size range |
Φ 150mm- Φ 300mm |
打磨輪轉速 Grinding wheel speed |
2180r/min |
效率 The efficiency of |
2.5min/ 筒 2.5min/cylinder |
機床總功率 The machine total power |
3.05KW |
機床外形尺寸 Machine tool shape dimension |
長×寬×高≈ 1400mm × 1000mm × 1180mm Long * wide * high≈1400mm×1000mm×1180mm |
機床重量(凈重 ) Machine weight (net weight) |
約850 kg about850kg |